--- Forwarded Message from Daniel Tom <[log in to unmask]> --- >From: Daniel Tom <[log in to unmask]> >To: Language Learning and Technology International Information Forum <[log in to unmask]> >Subject: Re: #5601.5 Designing classrooms program (!) >In-Reply-To: <[log in to unmask]> >Date: Tue, 18 Apr 2000 13:28:48 -1000 ------------------ This discussion on the PBS teleconference has brought to mind another thread. It is wonderful when you can actually plan for a renovated classroom, a new building or a new lab and take into consideration all the issues, but what do you do when you have to integrate new technology with existing infrastructure, sort of like "putting new wine into old wine skins?" It seems that we at the University of Hawaii have not had the luxury of being able to plan for a new installation. What has happened is that equipment is bought first because the money suddenly surfaces and you must spend it right away before it is taken away and then questions of where to install it and how to install it and what do we need in the way of furniture are asked only later after the equipment arrives. We are located in a building that was built in the early 70s with electrical wiring that was sufficient to support the power requirements of an audio language lab facility. Each lab had 48 student stations and 1 teacher console. Since then we have converted two of those labs into computer labs, one Mac and one PC, using existing wiring. The Mac lab was the first to be installed and in the beginning when we started we managed to trip the circuit breaker at least twice and this was with the lower end Macs of that time. Our staff electronics technicians were able to calculate how many Macs could be run simultaneously along with the printer without tripping the circuit breaker and we configured the lab accordingly. We have successfully managed to upgrade the Macs periodically without tripping the breaker again. However, we have just installed all new G4s and face this problem again. We want to keep some of the older Macs in the lab also but don't know how many of those can be installed with the new G4s and still be safe electricity wise. Sooner or later re-wiring will have to take place, not only for our labs, but probably for the entire building. However, all of that takes money and the appropriate paper work, etc., and probably will not happen anytime soon. Meanwhile, we must integrate the technology with no clear blueprint for the future. Daniel Tom Language Telecommunications, Resource & Learning Center University of Hawaii E-mail: [log in to unmask] FAX: 808-956-5134 Voice: 808-956-5118