Error during command authentication.
Error - unable to initiate communication with LISTSERV (errno=10061, phase=CONNECT, target=127.0.0.1:2306). The server is probably not started.
--- Forwarded Message from Bob Majors <[log in to unmask]> --- >User-Agent: Microsoft-Entourage/10.1.1.2418 >Date: Fri, 21 Nov 2003 13:34:15 -0800 >Subject: Re: #7348 Video Production Light & Sound >From: Bob Majors <[log in to unmask]> >To: Language Learning and Technology International Information Forum <[log in to unmask]> >In-Reply-To: <[log in to unmask]> ------------------ > Now I'm looking at my sound options. Anyone got any suggestions for external > micing solutions (for a DV camera with a standard 1/8" audio input) that would > be relatively inexpensive and versatile? I wrote something up a while back but can get the archives to work. Without knowing what environments you'll be working in (indoor only?), how many people, motion acting, etc., and your budget, it's hard to say, but this might help a bit: Quality lavaliers ('lapel' mics) when placed correctly, and when actors don't wear noisy closes or thump their chest (or if you place it in their hair) work well, but there can be trouble there for the reasons I mention, plus cables to trip over, and if you use poor quality wireless you add to your problems. You probably aren't looking for a boom operator, so shotgun mics may not be useful unless your talent is still. PZM (pressure zone) microphones (Crown, even Radio Shack if you modify the battery supply) work fairly well for picking up sound in a room -- you will pick up a lot of ambience, so a deader room works better (or if the mic is close). Get a mixer. If you need to be mobile, Shure brand, or if you always have access to power, Mackie, Behringer, etc. Compression/limiting is always nice if you have it and use it properly. Make sure you have strain relief on the little 1/8" cable. And make sure you have the proper levels throughout the signal chain -- not too much so as to distort, but not too little to cause extra noise down the chain by amplifying a too-low signal. Bob Majors Language Learning Center University of Washington